This Metallic Super Puff is a heat transfer vinyl that appears flat at first, but expands to 3D raised finish when applied with a heat press.
Quick Reference
Temp: 140-145°C
Time: 5 Seconds + 10 seconds
Peel: Cold after first press
Application Instructions
- Cut the vinyl on mirror.
- Weed excess vinyl.
- Preheat garment for 2-3 seconds.
- Place the vinyl on the garment.
- Using HIGH pressure press at 140-145°C for 5 seconds
- Cold peel carrier sheet
- Cover in baking paper and with HIGH pressure press again at 140-145°C for 10 seconds
- Wait at least 24 hours after application before washing inside out.
Care Instructions
- Cold wash inside out
- Do not iron on print or dry clean
- Wait 24-48hrs before first wash
TIPS
- Pressure is key. Turn the dial or up the bar pressure number before starting
- If using an easy press it must be on a hard flat surface and get your body weight behind it with high and even pressure. Don’t not move easy press around
- Use other films first and apply puff as the last layer HTV if layering.