Puff Glitter HTV

Puff Glitter is a heat transfer vinyl. It appears flat at first, but expands to a high 3D raised finish when applied with a heat press.

Quick Reference

Temp: 145-155°C  Time: 8-15 seconds Peel: hot
Please note puff always requires testing with your heat source before production.
Simply cut a small corner off with scissors and apply on an old piece of fabric to find the optimum temp and time for your press.

Application Instructions

1. Cut the vinyl on mirror. Glitter side faces mat, dull side up.
2. Weed excess vinyl.
3. Preheat garment for 2-3 seconds.
4. Place the vinyl on the garment.
5. Using HIGH pressure press at 145-155°C for 8-15 seconds
6. Hot peel carrier sheet
7. Wait at least 24 hours after application before washing inside out.

Care Instructions

• Cold wash inside out
• Do not tumble dry
• Do not iron on print or dry clean
• Wait 24-48hrs before first wash

TIPS

• Pressure is key. Turn the dial or increase the the bar pressure before starting.
• If using an easy press it must be on a hard flat surface and get your body weight behind it with high and even pressure. Don’t not move easy press around
• Puff HTV should usually only be pressed once, subsequent presses can flatten the HTV. Use other films first and apply puff as the last HTV if layering.
• Can be layered on top of strip flock HTV