Stahls Effect HTV
Stahls Effect HTV comes with a carrier sheet on the top and a heat activated adhesive on the underside of the vinyl. The Carrier sheet stays on while cutting to keep the design together. As a result the HTV needs to be placed carrier sheet facing down to cut and set to mirror.
Please Note: Spectrum has a pattern repeat line every 60cm approx this is not a fault, it is the way this product is produced. This appears in the meter lengths only as we have cut it out from the sheets
Temp: 150°C /305°F
Time: 10-15 seconds , firm pressure
Cutting: Holographic films are thicker than regular HTV. Cut similar to light cardstock.
- Cut the vinyl on mirror
- Weed excess vinyl
- Preheat garment for 2-3 seconds
- Place the vinyl on the garment
- Using firm pressure press at 150°C /305°F for 10-15 seconds
- Peel carrier sheet cold
- Wait at least 24 hours after application before washing